Distributors of all types of fixings and fasteners

ROUND SELF CLINCH NUTS ZINC PLATED STEEL

Self-clinching nuts provide load bearing threads in thin sheets.

High push-out and torque-out resistance.

Used where sheets are too thin for normal tapping operations.

Installed by placing them in correctly sized holes in sheets and applying a parallel squeezing force, usually with a press.

Applying pressure causes the parent material to flow into the specially designed under head configuration offering a load bearing and torque resistant joint.

DescriptionPrice BreaksQtyBuy
M4 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
M4 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
PRICE FOR
£ 0.06
M5 x 14g ROUND SELF CLINCH NUTS A2 STAINLESS STEEL
M5 x 14g ROUND SELF CLINCH NUTS A2 STAINLESS STEEL
PRICE FOR
£ 0.06
M6 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
M6 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
PRICE FOR
£ 0.08
M8 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
M8 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
PRICE FOR
£ 0.10
M10 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
M10 x 14g ROUND SELF CLINCH NUTS ZINC PLATED STEEL
PRICE FOR
£ 0.19

M4

Minimum recommended sheet thickness: 1.4mm.

Required hole diameter: 5.4mm - 5.49mm

Nut diameter: 7.95mm

Minimum edge distance to hole centre: 6.9mm

Installation: 18 - 27 kN

Torsional Resistance: 5 Nm

Pushout: 1255 N

 

M5

Minimum recommended sheet thickness: 1.4mm.

Required hole diameter: 6.35mm - 6.43mm

Nut diameter: 8.75mm

Minimum edge distance to hole centre: 7.1mm

Installation: 18 - 38 kN

Torsional Resistance: 6.9 Nm

Pushout: 1115 N

 

M6

Minimum recommended sheet thickness: 2.3mm.

Required hole diameter: 8.75mm - 8.83mm

Nut diameter: 11.1mm

Minimum edge distance to hole centre: 8.6mm

Installation: 27 - 36 kN

Torsional Resistance: 17.1 Nm

Pushout: 1765 N

 

M8

Minimum recommended sheet thickness: 2.3mm.

Required hole diameter: 10.5mm - 10.58mm

Nut diameter: 12.65mm

Minimum edge distance to hole centre: 9.7mm

Installation: 27 - 36 kN

Torsional Resistance: 20.4 Nm

Pushout: 1870 N

 

M10

Minimum recommended sheet thickness: 3.2mm.

Required hole diameter: 14mm - 14.08mm

Nut diameter: 17.35mm

Minimum edge distance to hole centre: 13.5mm

Installation: 32 - 50 kN

Torsional Resistance: 36.1 Nm

Pushout: 2021 N

 

Manufactured from zinc plated steel.

All threads are metric coarse.

MAILING LIST
For news and offers subscribe to our mailing list
We take your privacy seriously, you will only ever recevie relevant information from KayFast and we will not sell your details to third parties.
SECURE PAYMENT PROCESSING
secure payment SSL certificate
Unit 10
Flanshaw Way
Wakefield
West Yorkshire
WF2 9LP
©2021 Kayfast all rights reserved. Site by edoru