Distributors of all types of fixings and fasteners
DescriptionPrice BreaksQtyBuy
A43 THREADLOCK 50ml
A43 THREADLOCK 50ml N/A
PRICE FOR
£6.95
A70 STUDLOCK 50ml
A70 STUDLOCK 50ml N/A
PRICE FOR
£6.95

A43 THREADLOCK- Oil Tolerant Threadlocking Adhesive

A medium viscosity, medium strength, screw and threadlocker. Capable of bonding “As Received” parts covered with a light film of oil. Non-drip consistency for clean, economic application.

Uses

Bond It A43 THREADLOCK can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre-treatment. Also suitable as a standard anaerobic threadlocker for fine to medium pitch threads.

Preparation

Remove heavy oil and grease contamination. Best results are obtained on clean parts.

Application

Apply sufficient adhesive to coat the treads. The adhesive will start to cure on exclusion of air from the bonding system. Observe handling and strength times stated below.

Bonding Time

Assuming room temperature is 20C.

Handling: < 15 minutes

Full strength: 24 hours

Storage Conditions

Store in a closed upright container between 3 and 20C in dry dark conditions. At low temperatures the shelf life will be prolonged.

Shelf Life

Minimum shelf life 6 months @ 20C.

 

A70 STUDLOCK - Anaerobic Adhesive

A high strength, anaerobic adhesive for the permanent retention and sealing of threaded fasteners, sleeves and bearings. It is resistant to fuels, oils, hydraulic and refrigeration fluids.

Uses

Bond It A70 STUDLOCK can be used for fixing and sealing of plugs, through bolts and studs into castings, etc. It eliminates split pins, double nutting and spot welds and is vibration proof. A70 STUDLOCK also acts as a lubricant during assembly to ensure accurate torquing and protection against corrosion. Use of A70STUDLOCK improves throughput and efficiency.

Preparation

Surfaces must be clean, dry and free from grease.

Application

Coat threads and ensure the adhesive is present at locking position. The adhesive starts to cure on exclusion of air from the bonding system. Observe handling and strength times stated below.

Bonding Time

Assuming room temperature is 20C.

Initial strength approximately 10 minutes.

Full working strength 6-12 hours.

Ultimate cure 24 hours.

Storage Conditions

Store in a closed upright container between 3 and 20C in dry dark conditions. At low temperatures the shelf life will be prolonged.

Shelf Life

Minimum shelf life 6 months @ 20C.

MAILING LIST
For news and offers subscribe to our mailing list
We take your privacy seriously, you will only ever recevie relevant information from KayFast and we will not sell your details to third parties.
MASSIVE STOCK
We have one of the UK's largest ranges of stainless steel bolts and screws on the shelf
SAME DAY DISPATCH
Free delivery within Mainland UK and fast despatch
PAYPAL SECURE PAY
World leading secure online payment processing
Unit 10
Flanshaw Way
Wakefield
West Yorkshire
WF2 9LP
©2016 Kayfast all rights reserved. Site by edoru